HPRE

Menu

Members Rides

SinglesRide8


in
Members Rides

60 Guests, 2 Users
Dazzler, The_Rigger
Welcome, Guest. Please login or register.
Did you miss your activation email?
August 20, 2014, 04:53:08 AM

Login with username, password and session length

 

Author Topic: "Must Have" tools?  (Read 941 times)

Afro Samurai

  • Bulleteer
  • ***
  • Posts: 133
  • Karma: 0
  • Afro Samurai
Re: "Must Have" tools?
« Reply #15 on: September 19, 2013, 12:13:22 AM »
I am aware of the torque values being too high for alum fitted fasteners...but this list I found has the fastener sizes for most locations....

Arizoni

  • Grand Gearhead
  • *****
  • Posts: 4230
  • Karma: 0
  • "But it's a dry heat here in Arizona
Re: "Must Have" tools?
« Reply #16 on: September 19, 2013, 04:21:41 AM »
People need to remember, when torque values are given, the amount is for dry threads.

If the threads are lubricated or if a liquid thread lock like Loc-Tite is applied, reduce the value specified by 1/3.

This applies to the drain plug too.  Usually, the threads are still wet because of the oil draining out of the oil tank so the recommended 15 ft/lb for the UCE, given in the nfieldgear catalog should be only about 10 ft/lbs. when wet.
Jim
2011 G5 Deluxe
1999 Miata 10th Anniversary