HPRE

Menu

Members Rides

new RE Woodsman


in
Members Rides

41 Guests, 2 Users
bluesdaddy2, Blown265
Welcome, Guest. Please login or register.
Did you miss your activation email?
October 22, 2014, 09:37:24 AM

Login with username, password and session length

 

Author Topic: C-G Military Newbie  (Read 1169 times)

jazzcat007

  • Neophyte
  • *
  • Posts: 9
  • Karma: 0
Re: C-G Military Newbie
« Reply #15 on: November 15, 2012, 07:06:58 PM »
Thanks, Scott.  Looks like I have another project for this weekend.

Ducati Scotty

  • Grand Gearhead
  • *****
  • Posts: 6208
  • Karma: 0
  • 2010 Teal C5
Re: C-G Military Newbie
« Reply #16 on: November 15, 2012, 07:13:29 PM »
I found 1/4" foam was most useful on the first layer to fill in between the stamped in ridges.  Once that's down you've got a single surface and you can just glue on a few more layers.  Take your time sculpting, it's easier to take more off than put it back on.  Sculpt a little, mount the seat, sit on it for a good few minutes, then sculpt some more.   And dont be afraid to start over if it all goes to hell.  I did at least once, maybe twice.

Scott

jazzcat007

  • Neophyte
  • *
  • Posts: 9
  • Karma: 0
Re: C-G Military Newbie
« Reply #17 on: November 15, 2012, 07:15:20 PM »
Did you have the foam hang over the front edge to meet the tank?

Ducati Scotty

  • Grand Gearhead
  • *****
  • Posts: 6208
  • Karma: 0
  • 2010 Teal C5
Re: C-G Military Newbie
« Reply #18 on: November 15, 2012, 08:51:23 PM »
I think is sticks over a little, I didn't wrap it around any edges, just trimmed the front so it meets the tank nicely.  On the sides the top foam overhangs the surface by just a little.  I glued 1/4" all around the sides and then sanded down to it to make it meet nicely.

Scott