HPRE

Menu

Members Rides

Final Config..(maybe)


in
Members Rides

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 25, 2014, 02:34:01 PM

Login with username, password and session length

 

Author Topic: Time to change the chain....  (Read 457 times)

edthetermite

  • Grease Monkey
  • ****
  • Posts: 289
  • Karma: 0
  • The Emperor has no skin.
Time to change the chain....
« on: December 07, 2012, 02:10:30 PM »
Fifty miles from home and the chain had enough. It failed and exited the bike so smoothly I never heard anything but the whirring sound of the sprockets. Walking back down the highway to retrieve it I noticed the master link was gone. The slot on the retainer was pointed in the right direction. I never had one break at the master link before.
Ed   - Long Live the Iron Barrel !!!!

Visit MisterEdsWoodworking @ Etsy.com

2008 Military RE 535    2006 Ural Gear Up

ERC

  • Grand Gearhead
  • *****
  • Posts: 1547
  • Karma: 0
Re: Time to change the chain....
« Reply #1 on: December 07, 2012, 02:12:01 PM »
Lucky it didn't smash the case.  ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.

neil

  • Bulleteer
  • ***
  • Posts: 197
  • Karma: 0
  • Neil & Buzzy the Bullet
Re: Time to change the chain....
« Reply #2 on: December 27, 2012, 02:05:01 AM »
Hi Ed:
I had the same thing happen about 2 years ago. Same experience, it left without a sound, when I gave it throttle a second or two later engine increased but bike and me did'nt. I hiked back and retrieved mine too. It was lying in a straight line directly over the path I had just traveled. A dealer had replaced mine and the half link had the locking part facing inward so I couldn't check to see if it was tight. I replaced it myself with the half link lock facing out so I can check it visually before I ride each day. No more chain brakes.

Neil and Buzzy the Bullet