HPRE

Menu

Members Rides

magnetto model


in
Members Rides

Welcome, Guest. Please login or register.
Did you miss your activation email?
April 16, 2014, 05:12:44 PM

Login with username, password and session length

 

Author Topic: changing speedo dial  (Read 361 times)

owenant

  • Neophyte
  • *
  • Posts: 2
  • Karma: 0
changing speedo dial
« on: January 25, 2013, 08:26:04 AM »
I need to change my speedo from mph to kmph.

Can anyone direct me to some info on how to either, replace the speedo altogether or change the face.

Thanks

ace.cafe

  • Grand Gearhead
  • *****
  • Posts: 7371
  • Karma: 0
  • Ace Performance Bullets and Ace Fireball 535
Re: changing speedo dial
« Reply #1 on: January 25, 2013, 08:33:39 AM »
Many Enfield speedometers from India are marked with both mph and kph.
You should be able to find one on Ebay.
Home of the ACE Fireball 535 Bullet,  and the Joe Mondello Signature cylinder head for the Bullet.

Please visit my new website:
http://autos.groups.yahoo.com/group/AcePerformanceBullets/

jedaks

  • Bulleteer
  • ***
  • Posts: 179
  • Karma: 0
Re: changing speedo dial
« Reply #2 on: February 12, 2013, 10:07:13 AM »
How would one advance the odometer on a new speedo to match the old one?

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 2800
  • Karma: 0
  • Wide Open Spaces = Wide Open Throttle
Re: changing speedo dial
« Reply #3 on: February 12, 2013, 10:17:25 AM »
Quote
How would one advance the odometer on a new speedo to match the old one?

Remove the speedo cable from the wheel and hook up a drill to the cable end.  EVERY slowly check to see which direction on the moves the speedo needle forward.  And then start drilling.  LOL  Very tedious job but this will work.


The Blackhawk
1958 RE/Indian Trailblazer 711cc

jedaks

  • Bulleteer
  • ***
  • Posts: 179
  • Karma: 0
Re: changing speedo dial
« Reply #4 on: February 12, 2013, 10:24:19 AM »
Remove the speedo cable from the wheel and hook up a drill to the cable end.  EVERY slowly check to see which direction on the moves the speedo needle forward.  And then start drilling.  LOL  Very tedious job but this will work.

Thanks. I thought of that but to put 19,000 klm on a new speedo like that may take a week of 24hr a day running!

Is there some special tool to remove the glass cover and move the numbers?

Blltrdr

  • Grand Gearhead
  • *****
  • Posts: 1675
  • Karma: 0
  • cycle-delic music
Re: changing speedo dial
« Reply #5 on: February 12, 2013, 10:32:28 AM »
I changed mine out and kept the original for proof of mileage. I don't think this is a requirement in Washington State. My last bike I purchased the mileage was not a factor in the registration of it.
2003 Classic 500 5 spd
1992 Kawasaki ZG 1200 Voyager XII
1977 Yamaha XS 360-2D (Cafe Project)

barenekd

  • Grand Gearhead
  • *****
  • Posts: 4826
  • Karma: 0
Re: changing speedo dial
« Reply #6 on: February 12, 2013, 12:54:32 PM »
there are speedo shops around that can alter the odos. If you can get into it, you can do it yourself. However most of the vintage speedos require a crimper to get the chrome band off and on. Check for a vintage speedo shop in your area.
Bare
2013 Moto Guzzi V7 Racer
2011 Black Classic G5 (RIP)
I refuse to tiptoe through life only to arrive safely at death
http://www.controllineplans.com