HPRE

Menu

Members Rides

Throwback Thursday


in


Welcome, Guest. Please login or register.
Did you miss your activation email?
September 20, 2014, 10:05:22 PM

Login with username, password and session length

 

Author Topic: Really dumb question: how to get the goddam footpeg rubber on?  (Read 488 times)

Rich Mintz

  • Grease Monkey
  • ****
  • Posts: 425
  • Karma: 0
  • Daily rider in the city
Really dumb question: how to get the goddam footpeg rubber on?
« on: February 09, 2013, 11:23:24 PM »
I bent a footpeg and scraped the end of the footpeg rubber on my 2010 Bullet C5 (you can guess how) and had to replace it. I bought OEM parts from Hitchcocks and am trying to figure out how to push the damn rubber on. I believe both the mounting arm and the rubber are the correct parts. I can slide the rubber on partway, enough to make the bike rideable, but how do I get it on the rest of the way -- do I have to ream out the channel in the inside of the rubber with a screwdriver?

 

Jack Leis

  • Grand Gearhead
  • *****
  • Posts: 634
  • Karma: 0
  • 2011 G5 Classic, F&%king Stolen
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #1 on: February 09, 2013, 11:41:30 PM »
Rich, I feel your pain ! May I suggest that you use Ronsonal lighter fluid or alcohol and shove it on. Works well with handlebar grips also. If you ream them they'll vibrate off.
I would much rather ride a slow bike fast than a fast bike slow    Jack

Ducati Scotty

  • Grand Gearhead
  • *****
  • Posts: 6088
  • Karma: 0
  • 2010 Teal C5
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #2 on: February 09, 2013, 11:54:17 PM »
Get a mallet and tap, tap, tap. 

Ragmas

  • Grease Monkey
  • ****
  • Posts: 330
  • Karma: 0
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #3 on: February 09, 2013, 11:59:14 PM »
Boil some water, turn off the heat and put the rubber in said water for a few minutes.  The rubber should now be pliable enough to press on.

Samgar
2009 G-5 Military
Little Falls, NY

Craig McClure

  • Riding over 50 years
  • Grand Gearhead
  • *****
  • Posts: 793
  • Karma: 0
  • "No Future In Getting Old"
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #4 on: February 10, 2013, 05:47:20 AM »
I have had good luck getting footpeg covers on with KY gel & a heavy hammer. when it dries out it's not slippery anymore.
Best Wishes, Craig McClure

Jack Leis

  • Grand Gearhead
  • *****
  • Posts: 634
  • Karma: 0
  • 2011 G5 Classic, F&%king Stolen
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #5 on: February 10, 2013, 07:32:33 PM »
No comment
I would much rather ride a slow bike fast than a fast bike slow    Jack

barenekd

  • Grand Gearhead
  • *****
  • Posts: 5220
  • Karma: 0
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #6 on: February 10, 2013, 09:39:55 PM »
Dish soap and water and a big soft blow hammer. Real Easy.
Bare
2013 Moto Guzzi V7 Racer
2011 Black Classic G5 (RIP)
I refuse to tiptoe through life only to arrive safely at death
http://www.controllineplans.com

gremlin

  • Grand Gearhead
  • *****
  • Posts: 1232
  • Karma: 0
  • "Do one thing each day that scares you"
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #7 on: February 11, 2013, 02:37:46 AM »
................ big soft blow hammer......

California style !  :o   just like that across the chest ignition tester !!!    ;D ;D ;D
1996 Trophy 1200
2011 RE B5
1979 XS11 w/vetter terraplane
1981 XS11 streetfighter
1983 Venture Royale
1982 CB750K
1971 Triumph Trident
1969 CB450
1966 Sears (puch) 250


Jack Leis

  • Grand Gearhead
  • *****
  • Posts: 634
  • Karma: 0
  • 2011 G5 Classic, F&%king Stolen
Re: Really dumb question: how to get the goddam footpeg rubber on?
« Reply #8 on: February 11, 2013, 02:41:01 AM »
I saw him use his helmet tester. Very impressive !
I would much rather ride a slow bike fast than a fast bike slow    Jack