Menu

Members Rides

1968 Rebuild


in
Members Rides

Welcome, Guest. Please login or register.
Did you miss your activation email?
April 23, 2014, 07:14:34 AM

Login with username, password and session length

 

Author Topic: Fluid Capacities  (Read 260 times)

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 2832
  • Karma: 0
  • Wide Open Spaces = Wide Open Throttle
Fluid Capacities
« on: February 28, 2013, 11:40:08 PM »
What are the fluid capacities/weights/specs for the gear box, primary cover and engine case on the 58 Trailblazer?  Thanks!     Scottie


The Blackhawk
1958 RE/Indian Trailblazer 711cc

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 2832
  • Karma: 0
  • Wide Open Spaces = Wide Open Throttle
Re: Fluid Capacities
« Reply #1 on: March 04, 2013, 07:12:35 AM »
Seriously?!  No help on this?!


The Blackhawk
1958 RE/Indian Trailblazer 711cc

ERC

  • Grand Gearhead
  • *****
  • Posts: 1400
  • Karma: 0
Re: Fluid Capacities
« Reply #2 on: March 04, 2013, 08:01:47 AM »
Gearbox 90w or grease like used in new Bullet gearboxes. fill it to the level plug on side of box. I use 20w50 in engine fill it about half way up on dip stick. 2 quarts maybe. 10w30 in primary till it comes out of level plug in bottom of cover with the bike level not on side stand.   ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.

High On Octane

  • Grand Gearhead
  • *****
  • Posts: 2832
  • Karma: 0
  • Wide Open Spaces = Wide Open Throttle
Re: Fluid Capacities
« Reply #3 on: March 04, 2013, 09:58:49 PM »
Thanks ERC.  That's what I needed to know.    :)


The Blackhawk
1958 RE/Indian Trailblazer 711cc