HPRE

Menu

Members Rides

Texas Electra


in
Members Rides

Welcome, Guest. Please login or register.
Did you miss your activation email?
October 22, 2014, 08:05:37 AM

Login with username, password and session length

 

Author Topic: Wiring- Under the Rear Mudgard  (Read 190 times)

Bulletman

  • Grand Gearhead
  • *****
  • Posts: 612
  • Karma: 0
  • 2011 - C5 Classic Black
Wiring- Under the Rear Mudgard
« on: May 07, 2013, 01:50:45 AM »
I have relocated the turn signals on the rear mudguard with the new bullet turn signals. Also installed a new Tombstone tail light.
My Dilemma is How do i STICK/ATTACH the "new wires" UNDER the mudguard safely (they get attached to the current  harness which is tethered to the mudguard with fasteners) and not worry about them coming loose or hitting the tire while in motion.
"A Blast from my Past"
Mark F   (Northern, CA)
Black C5 2011

GSS

  • Grand Gearhead
  • *****
  • Posts: 747
  • Karma: 0
Re: Wiring- Under the Rear Mudgard
« Reply #1 on: May 07, 2013, 03:52:20 AM »
You could separate the right and left turn signal wires and not run them inside the fender. A common method is to run them from under the seat and then route them between the outside of the fender just below the fender frame running on either side. Simply zip tie to a couple of spots and it will be hidden from sight.
2014 GT - Red
2010 C5 - Teal
It's a Jeep thing......