HPRE

Menu

Members Rides

G5 - 1000miles


in
Members Rides

48 Guests, 5 Users (1 Hidden)
Pickasaurus, REpozer, pmanaz1973, Ducati Scotty
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 29, 2014, 06:19:47 AM

Login with username, password and session length

 

Author Topic: installed turnsignals and 7" headlight, now ampmeter is dead?  (Read 1034 times)

Roland

  • Neophyte
  • *
  • Posts: 13
  • Karma: 0
I installed a 7" tribar headlight and two front turnsignals last night.  All works fine except ampmeter does not budge! always pegged to left. not a bit of movement.  I need ideas as to what i have done.  everything seems fine, bike starts and runs with lights etc..
2008 classic AVL
1992 Harley Davidson FatBoy

Roland

  • Neophyte
  • *
  • Posts: 13
  • Karma: 0
Re: installed turnsignals and 7" headlight, now ampmeter is dead?
« Reply #1 on: June 18, 2008, 12:54:25 AM »
OK, i wasted a post... i tapped on the meter a bit harder than yesterday and it broke the needle free... :-\
2008 classic AVL
1992 Harley Davidson FatBoy

PhilJ

  • Grand Gearhead
  • *****
  • Posts: 2247
  • Karma: 0
Re: installed turnsignals and 7" headlight, now ampmeter is dead?
« Reply #2 on: June 18, 2008, 11:12:54 AM »
But at  some point you must have shorted something to get the meter to total discharge position. I'd check behind the head light and make sure there are no wires under stress or frayed.