HPRE

Menu

Members Rides

My 2007 Electra 5S


in
Members Rides

58 Guests, 0 Users
Welcome, Guest. Please login or register.
Did you miss your activation email?
November 27, 2014, 06:55:25 AM

Login with username, password and session length

 

Author Topic: Flatside carb  (Read 1722 times)

jonapplegate

  • Grand Gearhead
  • *****
  • Posts: 535
  • Karma: 0
  • you stand tall when you stoop to help
Flatside carb
« on: July 09, 2008, 05:18:25 AM »
Fitted the flatside today. Goes on fairly easily although look out for the L. hand bolt. I had to just barely screw the nut on while the carb was still very loose and before I had done the same to the r. side. Very limited clearance here and you will not have room to get the nut on after the R. side is started.
   Also, put on the '50's style header and short muffler. Loosened up everything necessary, mocked up header and muffler, began tightening everytbit by bit and you know what? That exhaust went on without a hitch!
  Sounds great, runs great.