Members Rides

NEC 2007 pic 10

Members Rides

55 Guests, 2 Users
kels_584, skyfli
Welcome, Guest. Please login or register.
Did you miss your activation email?
March 28, 2015, 09:24:21 AM

Login with username, password and session length


Author Topic: How to adjust the neutral finder  (Read 2456 times)

Spitting Bull

  • Grand Gearhead
  • *****
  • Posts: 535
  • Karma: 0
How to adjust the neutral finder
« on: October 16, 2007, 07:12:52 PM »
The stop beneath the neutral-finder lever is an eccentric rod with a bolt holding it in position.

Park the bike with some "packing" under the centre-stand, so that the rear-wheel is free to rotate. Loosen the bolt holding the eccentric, turn it so that the "big-side" is down. Now start the engine and engage second gear. Slowly pull the neutral-finder down till it slips out of gear. Turn the eccentric to stop the lever at that position. Tighten the bolt.

One cylinder is enough for anyone.


  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Re: How to adjust the neutral finder
« Reply #1 on: October 19, 2007, 08:46:48 PM »
When mine slips out of adjustment I put it in neutral and adjust the lever all the way down....Dew.
If it hurts, you're not dead yet!!!!!