HPRE

Menu

Members Rides

Done Finally


in
Members Rides

47 Guests, 6 Users (1 Hidden)
kodai, Scotty Brown, Grant Borden, B5 Ben, ace.cafe
Welcome, Guest. Please login or register.
Did you miss your activation email?
December 18, 2014, 04:24:52 AM

Login with username, password and session length

 

Author Topic: How to adjust the neutral finder  (Read 2425 times)

Spitting Bull

  • Grand Gearhead
  • *****
  • Posts: 535
  • Karma: 0
How to adjust the neutral finder
« on: October 16, 2007, 07:12:52 PM »
The stop beneath the neutral-finder lever is an eccentric rod with a bolt holding it in position.

Park the bike with some "packing" under the centre-stand, so that the rear-wheel is free to rotate. Loosen the bolt holding the eccentric, turn it so that the "big-side" is down. Now start the engine and engage second gear. Slowly pull the neutral-finder down till it slips out of gear. Turn the eccentric to stop the lever at that position. Tighten the bolt.

Tom
One cylinder is enough for anyone.

dewjantim

  • Grease Monkey
  • ****
  • Posts: 430
  • Karma: 0
Re: How to adjust the neutral finder
« Reply #1 on: October 19, 2007, 08:46:48 PM »
When mine slips out of adjustment I put it in neutral and adjust the lever all the way down....Dew.
If it hurts, you're not dead yet!!!!!