Members Rides

my bullet electra.

Members Rides

78 Guests, 4 Users
Aaron707, Blltrdr, REvs, dvukin
Welcome, Guest. Please login or register.
Did you miss your activation email?
May 30, 2015, 03:40:04 PM

Login with username, password and session length


Author Topic: Point plate fasteners  (Read 1460 times)


  • Kept man
  • Grand Gearhead
  • *****
  • Posts: 2292
  • Karma: 1
  • Theres a last time for everything
Point plate fasteners
« on: December 06, 2007, 03:35:54 PM »
After reading about some bikes with stripped out point plate fasteners I locktited 10-32 by .750 set screws in the threaded holes. Then drilled out the nut-spacers with a 21 drill. That gets rid of the bolt part, then send the 10-32 tap all the way through. easy enough and now you can adjust your timing till you drop, with no stripping.