HPRE

Menu

Members Rides

1998 Std 500


in
Members Rides

Welcome, Guest. Please login or register.
Did you miss your activation email?
July 28, 2014, 04:39:19 PM

Login with username, password and session length

 

Author Topic: How to remove the Advance/Retard plate from the distributor shaft RE Bullet 500  (Read 848 times)

maxy123

  • Neophyte
  • *
  • Posts: 8
  • Karma: 0
Hi Guys
I would be grateful if anyone could tell me how to remove the

Advance/Retard plate from the distributor shaft on a RE Bullet 500. If

it is screwed on, is it clockwise or anticlockwise to unscrew?
Look forward to hearing from you
Thank you

ERC

  • Grand Gearhead
  • *****
  • Posts: 1484
  • Karma: 0
Take the two nuts off that hold the cover on the distributor. They are right hand thread. then pull the plate toward you.  ERC
2-57 Apaches, 2-57 Trailblazers, 60 Chief, 65 Interceptor, 2004 Bullet, 612 Bullet chopped.

RGT

  • Grand Gearhead
  • *****
  • Posts: 564
  • Karma: 0
  • '94 350 Bullet
if you mean the advance mechanism after removing the center bolt I just gave mine some gentle side to side taps with a brass hammer, it is a taper fit and should come apart easy.

cyrusb

  • Kept man
  • Grand Gearhead
  • *****
  • Posts: 2290
  • Karma: 1
  • Theres a last time for everything
Or you could send the puller screw down the center to pop it off the taper. The advance unit(if thats what hes talking about) is threaded internally .