March 18, 2009, 03:57:16 PM Thanks, I fabricate that Motorcycle Fly Screen using the smallest piece of plastic lexan (10X10) from Loews. and some hardware 6" toggle bolt, washer, nuts etc.. I cut the lexan and file to perfection, drill the holes and then using a electrical stove to hit up and bent the lexan to give the curb I wanted it to have. Finally ad a plastic chrome adhesive edge Guard to ad pro Finish. install in the same holes where the cables exit to go to the handle bars. and one strip of metal attaching from the screw on top of the head light to the front of the screen.
All of that for about ten dollars. and two hours of labor.