Electra Tachometer/Rev Counter

Welcome, Guest. Please login or register.
Did you miss your activation email?

May 21, 2013, 10:25:34 PM

Previous Image | Next Image

Description: My added on Tachometer

Picture Stats:
Views: 3859
Posted by: EnfieldJake

July 01, 2008, 08:00:13 PM

Rating:

by 6 members.

Image Linking Codes

0 Members and 1 Guest are viewing this picture.

Comments
pwsaunders Neophyte Karma: 0 Posts: 8	September 27, 2010, 01:08:03 PM Thanks!
EnfieldJake Scooter Karma: 0 Posts: 61	September 27, 2010, 08:59:13 AM I would probably call the tech dept. at Classic Motorworks and inquire to see if your model uses the same electronic ignition system as the Electra. If so I'd think you're good to go.
pwsaunders Neophyte Karma: 0 Posts: 8	September 26, 2010, 10:12:53 PM Do you think it will work ok on the 2010 Classic?
EnfieldJake Scooter Karma: 0 Posts: 61	September 26, 2010, 10:02:42 PM No adapter needed. The Electra fires twice per cycle, once on the power stroke, the other on the exhaust stroke. The tach sees the signal it needs to make an accurate display of revolutions. Good luck
pwsaunders Neophyte Karma: 0 Posts: 8	September 26, 2010, 09:56:19 PM Did you need to use the Crane Cams Interface Adapter, part number 381-331? It is listed under the notes for using the mini tach on a single cylinder, on the J&P site.
EnfieldJake Scooter Karma: 0 Posts: 61	August 23, 2010, 09:30:22 PM Single fire, works great with the Electra's wasted spark.
gtdohc Neophyte Karma: 0 Posts: 10	July 29, 2009, 10:38:32 PM Nice tach, wondering is it a single or dual fire unit?